Pouch Cell Final Vacuum Sealing Machine
with Auto Piercing Function
Model: MR-BFZ200
MR-BFZ200 is mainly used for pouch cell vacuuming and second
sealing after electrolyte filling.
Features:
1. Head made of copper material, heat transfer effect is good to
save power consumption, improve efficiency, energy saving than
similar products.
2. The upper and lower head pressure can be adjusted through the
regulator to achieve different process parameters.
3. Upper and lower head with cylinder driven by two linear guide
sleeve guide, up and down flexible, accurate guidance to ensure
product parallelism after sealing requirements
4. With automatic puncturing function, waste recovery unit.
5. Cover cavity driven by the cylinder, guided by a linear guide
sleeve, up and down flexible, accurate guide to ensure product
sealing requirements
6. Can be applied to different specifications of the product
battery, and the adjustment is simple and convenient.
7. Easy to operate, beautiful appearance, small size, light weight.
Specification
| Model | Pouch Cell Final Sealing Machine MR-BFZ200 |
| Sealing head temperature | RT-250℃,adjustable |
| Temperature control precision | ±1.5℃ |
| Heat sealing pressure | 0-7kg/cm2,adjustable |
| Heat sealing time | 0-99 second,adjustable |
| Sealing width | 5mm,adjustable |
| Vacuum degree | -90Kpa ~ 0 adjustable (vacuum pump optional) |
| Voltage | 220V/50Hz |
| Power | 300W heat pipe, heating when the power consumption of about 0.6KW |
| Compressed air source | 0.5-0.7Mpa |
| Size | L500mm*W500mm*H700mm |
| Head parallelism | with triple carbonless paper, head pressure at 0.6MPa, the
temperature at 200 ℃ when the seal out of the seal |
| Air consumption | about 0.2L compressed gas / each time |
| Pneumatic working speed | ≥ 180 times / h |
| Dimension | 515mm * 350mm * 505mm |
| Weight | 56kg |
Picture for Reference
For completing the full sealing procedure, you may need the
following combination:
* A. Compact Heating Sealer (suitable for top & side sealing with
tab)
* B. Vacuum Sealing Machine (for pre-sealing in glove box after
injection of electrolyte)
* C. Final Vacuum Sealing Machine
(for vacuuming and second sealing with automatic puncture and
degassing function)
If you don't want to spend too much budget on the sealing part,
machine A plus B can also meet your basic sealing need!
Pouch Cell Assembly Machines
Cylindrical Cell Machine
Coin Cell Machines
MRBEST Factory Show
