Layer by Layer Stacking Machine for Pouch Cell Electrode
Model: MR-BDP200-C
Product Introduction:
It is mainly used for the assembly of Z-shaped laminations of
lithium battery positive, negative electrode and diaphragm.
The device realizes manual loading, subsequent pole piece position
correction and lamination process by fully automatic, and has the
characteristics of high lamination efficiency and high stacking
precision. The device can be designed to stack up to 200*200mm
batteries. Different sizes can be realized by adjusting fixtures,
which is very suitable for the development and sample preparation
of laminated lithium-ion batteries. The device adopts a single
cantilever structure design, and the coil isolation membrane
automatically controls the constant tension, and the motor drives
the diaphragm to move left and right to realize the zigzag
lamination.
Main Features:
*The number of laminations can be automatically controlled
according to preset settings;
*Adopt compatibility design, the battery size change can be
realized by adjusting the positioning fixture, and the adjustment
range is large;
*PLC control, HMI operation, easy to use and maintain;
*Pole piece manual loading, automatic positioning, automatic
suction of the robot, automatic stacking;
* The diaphragm is forcibly guided and the pole piece is
mechanically positioned to ensure high lamination accuracy;
Technical Specifications
| Model | Semi-Auto Layer by Layer Stacking Machine MR-BDP200-C |
| Working Voltage | AC220V 50/60Hz |
| Power | 1KW |
| Stackable Size | Max. L 200mm * W 150mm Min. L 62mm * W 46mm |
| Stackable Layers | Up to 500 layers |
| Stacking Speed | Up to 5 layers/min |
| Max. Electrode Thickness | Piled up thickness < 10 mm |
| Aligning Accuracy | ±0.5 mm for stacked electrodes |
| Acceptable Separator Roll Size | I.D>3'' (76mm) O.D<9.8'' (250mm) |
| Stacking Fixture | One set of 80 x 50mm stacking die fixture is included for immediate
use. If you need different size electrode stacking, please inform us
before order. We will make for your at extra cost. Allowable customization size: Max. 200mm x 200mm; Min. 80 mm x 50 mm |
| Vacuum Pump | An Oilless Vacuum pump (28L/min, 140W) is built-in to enable the
vacuum suction function of the electrode pick-up/stacking
manipulator. |
| Suggested Air Pressure | 0.5 - 0.8 MPa (Air compressor is not included in the standard
package.) Attention: If a gas cylinder is used instead of air compressor, a two-stage pressure regulato must be installed on the
gas cylinder to limit the pressure within the required working range for safe operation. |
| Product Dimensions | 1200 mm L x 800 mm W x 900 mm H |
| Weight | 500 kg |
| Compliance | CE Certified |
| Warranty | One Year limited warranty with lifetime support Rusting and damage due to improper storage condition or maintenance
is not covered by warranty |
| Application Notes | Note: please confirm electrode sheet size before order (each mold
only fit with one size electrode) |
Maintenance methods and precaution
1. Always wipe the pendulum roller and the lamination table to keep
it clean.
2. The moving parts of the bearing slides are lubricated to keep
the movement smooth.
3. If it is not used for a long time, wipe the surface of the
machine clean and wrap the packaging tape for storage.
4. Regularly check the screws, nuts, pins and other fasteners in
all parts of the machine to prevent looseness and prevent machine
quality accidents and personal accidents.
Picture for Reference
Pouch Cell Assembly Machines
Cylindrical Cell Machine
Coin Cell Machines
MRBEST Factory Show
Shenzhen Meirui Zhida Technology Co., Ltd
Manufacturer Vendor for Lithium Battery Equipment in Shenzhen China
MRBEST Engineers has over 20 years experience in Lithium-ion
Battery Researching and Manufacturing!
MRBEST International Sales Team has over 10 years export experience
24*7 Online after-sale dept and quick response!
Provide complete solution for Battery & Material Research Equipment
MRBEST Factory with ISO Certificate and products are CE approved
