Pouch Cell Electrode Die Cutter For Battery Electrode Cutting
Model: MR-MQ280
MR-MQ280 is a Precision Pouch Cell Electrode Die Cutter. It is a
necessary tool in the production line of pouch cell to produce
specific shapes of cathodes and anodes with current collector tabs.
The IR sensor (Safety Curtain) built in the front of the machine
ensures operation safety when electrode sheets are fed from the
front.
Features
*Adopt infrared positioning device to accurately and conveniently
locate and cut the pole piece;
* It is convenient and quick to change the die cutter;
*The die life is long, and the normal use is ≥30,000 times;
* There are no quality defects such as rough edge, clippings, or
creasings;
*Between manual and fully automatic, the efficiency is 800 ~ 2000
pieces / hour;
(According to the size of the punched pole piece, you can punch 1
to 8 pieces each time, the standard is 2 pieces)
* Four guide column structure, smooth sliding up and down;
*The equipment inlet has a safety protection light curtain, which
is very safe to operate;
* Exquisite appearance, sheet metal adopts three-dimensional
geometric design, simple and beautiful;
* Easy to operate, safe and reliable, small size;
Instructions
Put the electrode into the die-cutting position, and then press the
foot switch. The booster cylinder drives the die-cutting knife
group to automatically cut the electrode.
Specifications:
| Model | Pouch Cell Electrode Die Cutter MR-MQ280 |
| Infrared Positioning Device | Accurate and convenient positioning of the pole piece |
| Quality | Vertical burr ≤15μm, horizontal burr ≤20μm; |
| The life of the Die | Normal use ≥30,000 times |
| Maximum die cutting size | 280x180mm (Two standard electrodes (Cathode & Anode) cutting dies are
included for immediate use, can be customized according to customer
requirements) |
| Punching accuracy | ±0.1 mm |
| Air Cylinder | 3 tons Max. pressure Attention: If a gas cylinder is used instead of an air compressor,
a two-stage pressure regulator must be installed on the gas
cylinder to limit the pressure within the required working range
for safe operation. |
| Die cutting stroke | 150mm |
| Gas-liquid air cylinder drive | punching force and punching speed adjustable |
| Production Yield | 800 - 2000 pieces of electrodes per hour |
| Warranty | One-year limited warranty with lifetime support Rusting and damage due to improper storage condition or maintenance
are not covered by warranty |
| Safety Sensor | Built-in IR sensor (Safety Curtain) to protect against hand
injuries during electrode feeding |
| Power supply | 220V/50Hz or 110V/ 60Hz |
| Max. Power Consumption | 100W |
| Compressed air | 0.5 Mpa to 0.8 Mpa |
| Dimensions | L580xW455xH900mm |
| Weight: | 180kg |
Picture for Reference
Pouch Cell Assembly Machines
Cylindrical Cell Machine
Coin Cell Machines
MRBEST Factory Show
Shenzhen Meirui Zhida Technology Co., Ltd
Manufacturer Vendor for Lithium Battery Equipment in Shenzhen China
MRBEST Engineers has over 20 years experience in Lithium-ion
Battery Researching and Manufacturing!
MRBEST International Sales Team has over 10 years export experience
24*7 Online after-sale dept and quick response!
Provide complete solution for Battery & Material Research Equipment
MRBEST Factory with ISO Certificate and products are CE approved
