5V50mA 8 Channel Coin Cell Tester Analyzer For Lithium Ion Battery Testing Machine

Model: CT-4008T-5V50mA

Features

1. 5V50mA Battery Tester is an eight-channel battery analyzer to analyze, voltage 0-5V. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software.

2. This coin cell tester system provides most applications in battery testing fields such as electrode materials research, battery performance test, small scale battery formation, capability grading, battery pack testing, etc.

3. The coin cell tester is suitable for all kinds of coin cell battery such as lithium battery, NI-MH battery, Zn-Mn watch battery and so on.

Specifications

5V50mA Three-Range Battery Testing System
Equipment material code:		CT-4008Tn-5V50mA-HWX
Indicator project		Indicator parameters
Enter the power supply		AC 220V ±10% / 50Hz
Input active power		25W
Resolution ratio		AD: 24bit；DA: 16bit
Input impedence		≥1GΩ
Voltage	Constant voltage range control	25mV~5V
	Minimum discharge voltage	-5V
	Accuracy	± 0.05% of FS
	Stability	0.1% of FS
Current	Output range per channel	Range 1:5μA ~ 1 mA; Range 2: 1mA ~ 25mA; Range 3: 25 mA~50mA
	accuracy	± 0.05% of FS
	Constant pressure cut-off current	Range 1: 2μA; Range 2: 50μA; Range 3:100μA
	Stability	0.1% of FS
Power	Single-channel maximum output power	0.25W
	Stability	0.2% of FS
Time	Current response time (10% FS to 90% FS)	＜500μs
	Working step time range	(365 * 24) hours / work step	Supported in time format: 00:00:00:00 (h, min, s, ms)
Data logging	Data recording conditions	Minimum time interval: 100ms
		Minimum voltage interval: 10 mV
		Minimum current interval: range 1:2 μ A; range 2:50 μ A; range 3:100 μ A
	Record frequency	10Hz
Charge	Charging mode	Constant current charging, constant voltage charging, constant current constant pressure charging, constant power charging
	Cut-off condition	Voltage, current, relative time, capacity, - △V
Discharge	Discharge mode	Constant current discharge, constant voltage discharge, constant current constant voltage discharge, constant power discharge, constant resistance discharge
	Cut-off condition	Voltage, current, relative time, and capacity
Pulse mode	Charge	Constant current mode, constant power mode
	Discharge	Constant current mode, constant power mode
	Minimum pulse width	500ms
	Pulse number	A single pulse working step was supported for 32 different pulses
	Continuous charge / discharge charge switching	A pulse step can realize charging continuous switching, or discharge continuous switching; (charge-to-charge switching is not supported)
	Cut-off condition	Voltage, and relative time
DCIR test	Support for custom taking points for the calculation of DCIR
Recurrence	Circulating test range	1 to 65,535 times
	Single cycle step number	254
	Loop nesting	With nesting cycle function, up to 10 layer nesting support
Protect		● Power-loss data protection
		● It has the offline test function
		● Safety protection conditions can be set, setting parameters include: voltage limit, voltage limit, current limit, current limit, capacity limit, delay time
IP levels of protection		Protection level is IP20
Channel characteristics		The constant current source and the constant voltage source adopt a double closed-loop structure
Channel control mode		Independent control
Voltage and current detection and sampling		Four-line connection
Noise		<45dB
Data base		The MySQL database was used to centralize the test data
Upper-computer communication mode		Based on the TCP / IP protocol
Server operating system		Windows 7 / Windows 10 and above systems
Data output mode		EXCEL2003,2010,TXT
Server disk configuration		500GB
CI		Internet access
Leakage current		0.005μA
Number of machine channels		8
Equipment working environment requirements
Indicator project		Indicator parameters
Operating temperature range		0℃~40℃； Ensure the measurement accuracy within the calibration temperature (usually 25℃) plus or minus 5℃; Accuracy drift is 0.005% of FS /℃
Storage temperature range		-10℃~50℃
Relative humidity range of the working environment		70% RH (no moisture condensation)
Storage environment relative humidity range		80% RH (no moisture condensation)
Grilamp specifications and dimensions
Indicator project		Indicator parameters
Types of fixtures		Up and down fixtures
Clip image
		Crocodile fixtures		Polymer fixtures	PCB buckle fixture
		Pictures are for reference only, subject to the physical object
Case size per unit (W * D * H) (mm)		1U (19"),483*310*43 (mm)
Device pictures
		Pictures are for reference only, subject to the physical object

Shenzhen Meirui Zhida Technology Co., Ltd. is a Manufacturer specializing in a Complete Set of Lithium Ion Battery Research Equipment and Pilot Line. We has been committed to providing customers with comprehensive Battery Lab Equipment and Pilot Line to meet customers' new Lithium Battery Technology and New Needs in recent years, such as Sodium Batteries, Solid-state Battery and Semi-solid-state Battery Equipment. Create One-Stop Service for Battery Research Equipment for customers and provide Professional Technical Guidance and Support.

MRBEST related products include: Vacuum Mixers, Planetary Vacuum Mixers, Lab Transfer Coating Machine, Automatic Film Coating Machine, Electric Vertical Roller Machine, Pneumatic Die-cutting Machines, Electric Sealing Machines, Vacuum Pre-sealing machine, Secondary Sacuum Sealing Machine, Coin Cell battery Sealing Machine, Battery Winding Machine, Pouch Cell Sealing Machine, Ultrasonic Spot Welding Machine, Glove Box with Purification System etc. MRBEST products have been sold at home and abroad. Our main customer include: Universities, Research Institutes, Battery Positive and Negative Material Companies, Battery Cell Manufacturers, and New Energy EV Battery Manufacturers etc.